“LED lighting was our preferred choice and Stela really stood out. Indal WRTL were able to present very convincing evidence to support our final decision.” Richard Bergman

Luma

Luma is the LED solution to fulfil the challenges of traffic route lighting.

It is clear to see the visible difference made by Luma while offering additional benefits including high performance.

From its inception, Luma has offered substantial energy savings and application coverage which are now further enhanced by the introduction of even higher efficacy light sources and further LED driver optimisation. Coupled with the increased lumen packs available, now up to 52 klm 100,000 hours L80, the introduction of two new products, Luma 1 and Mini Luma, completes the coverage of the Luma range from S6, using the recently available R4, R5, R6 and R7 lenses, to ME1 with the Luminance R1, R2 and R3 lens variety.

The enhancements to the already established performance coupled with the extension to the range now offer complete coverage in state of the art LED technology across a breadth of applications.

Find out the latest updates for each model:

Luma 2 and Luma 3 Features

  • Service life up to 100,000 hours, L80
  • Up to 60% energy savings
  • Maintenance cost savings
  • Upgrade available, but not necessary
  • Replaces all traditional light sources for traffic routes
  • Post Top or Side Entry mounting
  • Analogue or Dali-based CMS compatible
  • 60 to 200 LEDs for optimum energy savings and life
  • 5,000 to 52,000 lumen packages to meet all lighting classes
  • Multiple lens distributions to suit alternate geometries
  • Overlay lighting principle to maximise uniformity
  • Replaces everything up to 400W SON
  • ME6 to ME1, S4 to S1 and CE3 to CE0 applications
  • Constant flux and programmable dimming options
  • Saves up to 40% energy on ME Class routes
  • True G1 to G4 glare rating (G5 and G6 – available 2012)
  • Recommended 6 year cleaning cycle to align with the column test
  • 3 light distributions for traffic routes
  • 4 light distributions for residential streets or conflict areas
  • Fit and forget or upgrade options

 

Luma 1 and Mini Luma Features

  • Outstanding performance
  • High energy savings
  • Lower Total Cost of Ownership
  • 100,000 hour service life
  • Replaces up to 150W SON and 140W CPO (Luma 1), and up to 100W SON (Mini Luma)
  • Constant flux and integral dimming options
  • Compatible with DALI and Analogue CMS
  • IP66 dual ingress protection
  • Removable gear tray
  • 3 light distributions for traffic routes
  • 4 light distributions for residential streets or conflict areas
  • Fit and forget or upgrade options

 

Luminaire Maintenance Factor

Luma provides improved luminaire maintenance factors. The table below shows suggested values, which should be multiplied by 0.80 for full life calculations or 0.90 for half life value.

 

Materials and Finish

  • Enclosure material aluminium: LM6 / DIN 320
  • Lens system: PMMA acrylic and toughened glass
  • Standard paint finish Sable Gris 900
  • Other RAL colours available on request

 

Ingress Protection and Impact Resistance

  • IP66 to EN60529
  • IK10 housing

Lumens

Initial lumens equivalent and energy using ConstaFlux technology:

  • 4.2 klm, 28W
  • 6.6klm, 46W
  • 15 klm, 98W
  • 25klm, 173W
  • 33klm, 215W
  • 40 klm, 274W
  • 50 klm, 379W
  • Medium S-Class (S3/S4)

Power consumption is the average circuit watts expected over a 100,000 hour operating period when running the LED’s at Constant Flux where lumen maintenance is 80% (100kh, L80).  The minium flux delivered therefore is the stated initial lumens x 0.8

Mini Luma

  • Workhorse for residential streets
  • Medium S-Class (S3/S4)
  • Improved glare control
  • Standard and wider roads
  • Small conflict areas
  • Capable of replacing PL-L, MBF, CPO, SOX and SON lamps up to 100W

Luma 1

  • Workhorse for lower ME Classes
  • High S-Class
  • Capable of replacing PL-L, MBF, CPO, SOX and SON lamps up to 135W
  • Wide roads
  • Medium conflict areas

Luma 2

  • 60/80/100/120 LED configuration
  • 7 to 32 klm CW
  • Workhorse for higher ME Classes
  • High S-Class or CE
  • Standard ME Class and wider roads
  • Large conflict areas
  • Capable of replacing CPO, HPI, CDO, SOX and SON lamps up to 250W
  • 3 ME, 4S + CE
  • ME6 to ME2, S3 to S1, CE3 to CE0
  • Tilt post top 0°, +5°, +10°
  • Tilt side entry -10°, -5°, 0°, +5°, +10°
  • Gx, G1, G2, G3, G4

Luma 3

  • 100/120/140/160/180/200 LED
  • 11.5 to 52 klm CW
  • Workhorse for higher ME 2 / ME 1 + hard shoulder
  • Very high CE
  • Target motorways and large city centre spaces
  • High ME Class
  • Very large conflict areas / High Mast
  • Capable of replacing HPI, CDO, SOX and SON lamps up to 400W and, subject to geometry and class, 600W SON
  • 3 ME, 4S + CE
  • Tilt post top 0°, +5°, +10°
  • Tilt side entry -10°, -5°, 0°, +5°, +10°
  • Gx, G1, G2, G3, G4
  • Up to S2klm L80, 100kh CW

Construction Standards

  • Designed in accordance with EN60529-2-3road
  • Lighting and conforms to CE marking directives including EMC requirements
  • EN61000-3-2
  • EN61000-3-3
  • EN55015

Luma 2

 

Luma 3

  • Luma 3
  • Luma 3 Post Top - fins
  • Luma 1
  • Luma 2
  • Mini Luma
  • Luma Brochure
    Luma Brochure 
    Download
  • Luma brochure
    Luma brochure 
    Download